Why Kyocera All in One Printer displays 'Cannot use polling reception.'?
If you cannot use polling reception, check with the recipient to ensure polling transmission is being used correctly on the sending machine.
Why Kyocera All in One Printer displays 'Cannot use sub address bulletin board communication.'?
Sub address bulletin board communication requires that the other fax machine has the same function. If it doesn't, it cannot receive faxes via a sub address bulletin board. Check with the recipient to confirm. Also, verify that the entered sub address or sub address password is correct.
Why is there 'No print output after reception' on my Kyocera All in One Printer?
If there's no print output after reception, check if memory forwarding is activated and verify the forwarding destination.
What to do if my Kyocera Printer cannot print?
If your Kyocera Printer isn't printing, first ensure that the power cord is plugged into an AC outlet and the power switch is turned on. Check that the printer cable is securely connected and that the machine was powered on after connecting the cable. If the print job is paused, press the Resume key. Finally, if an error message is displayed, follow the corresponding procedure.
How to clean Kyocera ECOSYS FS-1135MFP Printer dirty printouts?
If your Kyocera Printer produces dirty printouts, the platen or document processor might be dirty. Clean the platen or the document processor to resolve this issue.
What to do if Kyocera ECOSYS FS-1135MFP ejects blank sheets?
If your Kyocera Printer is ejecting blank sheets, make sure the originals are loaded correctly. When using the platen, place originals face-down and aligned with the slit glass. When using the document processor, place originals face-up.
What to do if my Kyocera Printer says paper jammed?
If a paper jam occurs in your Kyocera printer, the machine will stop, and the location of the jam will be indicated on the Message Display. Leave the machine on and follow the instruction to remove the jammed paper.
How to fix light printouts on Kyocera Printer?
If the printouts from your Kyocera Printer are too light, verify that the machine is not in Manual Density mode and select the correct density level if needed. Shake the toner container from side to side to evenly distribute the toner. If there's a message indicating the need for more toner, replace the toner container. Ensure the paper isn't damp and replace it if it is. Disable EcoPrint mode if it's enabled. Also, make sure the paper type setting matches the paper being used.
How to adjust darkness on Kyocera ECOSYS FS-1135MFP printouts?
If the printouts from your Kyocera Printer are too dark, check if the machine is in Auto Density mode and set the correct density level. Also, verify if the machine is in Manual Density mode and select the correct density level.
How to fix Kyocera ECOSYS FS-1135MFP operation panel not responding?
If the operation panel of your Kyocera Printer does not respond when the power switch is turned on, ensure that the power cord is plugged into an AC outlet.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Duplex Printing | Yes |
| Standard Memory | 256 MB |
| Connectivity | USB 2.0, Ethernet |
| Scanner Type | Flatbed, ADF |
| Scan Resolution | 600 x 600 dpi |
| Copier Resolution | 600 x 600 dpi |
| Fax Capability | Yes |
| Fax Transmission Speed | 33.6 kbps |
| Maximum Paper Size | A4 |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Dimensions | 494 x 430 x 448 mm |
| Print Speed | 35 ppm |
| Standard Input Capacity | 250 sheets |
| Copy Speed | Up to 35 cpm |
| Maximum Input Capacity | 800 sheets (with optional paper feeders) |
To Next Page