Kyocera ECOSYS M4125idn

Installation
Printer Driver 1-8
4
Review your settings. At least one utility must be selected to enable the Install
button. If your settings are correct, click Install.
5
To exit the installer application, click Finish.
A message may appear if there is a software installation failure. After clicking
Finish, retry the installation. If the same message appears again, contact your
system administrator.
The installation of the utilities are now complete. If prompted, restart your
computer.
Editing Driver Properties
1
In the Product Library window, click Custom Install.
2
In the Devices list, select a device and click the blue arrow to move it to the
Products to Install list.
3
In the Drivers list, select a driver and click the blue arrow to move it to the
Products to Install list.
4
In the Products to Install list, click Edit in one of the devices.
5
The Device dialog box opens and shows the model name and the IP address or
USB. If there are multiple drivers, the settings for each driver are separated into
tabs. Select the tab of the driver you want to configure. For every assigned
driver, the following driver properties appear:
Printer name
Enter a name for the device to a maximum of 63 characters.
Share the printer
Select this option to share this printing system with others. If selected, enter
a Share name for the printing system to a maximum of 63 characters.
Set as default printer
Select this option to send most or all of your print jobs to this printing device.
6
Click OK.
Editing Utility Properties
1
In the Product Library window, click Custom Install.
2
In the Utilities tab, select KYOCERA Net Viewer and click the blue arrow to
move it to the Products to Install list.
3
In the Products to Install list, click Edit in the KYOCERA Net Viewer utility
product.
4
A dialog box opens to show the utility options. Make your selections.
KYOCERA Net Viewer