Basic
Printer Driver 5-3
selection is selected, then the printer searches for another tray or cassette
using the same paper size and media type.
You can display the custom media type names from the printing system. If any
names have been changed at the printing system, the new names appear in
place of default names. To display the printing system names, use the Auto
Configure feature in Device Settings.
Some media types, such as transparencies, labels, and envelopes must be
supplied from the Multipurpose tray. Ensure that the paper is properly loaded
by following the instructions outlined in the printing system's Operation Guide.
Note: Source and Media type are separate items in the dialog box, but can
be combined using the Combine source and media type lists setting in
Device Settings > Compatibility. If they are combined, Media type is
unavailable on the Basic tab, and media types can be selected in the Source
list.
Source
With this feature, you can specify the tray or cassette that supplies paper for a
print job. The default is Auto source selection, which instructs the printer to
search for the media requested by the application or the printer driver. If the
selected tray or cassette empties during a print job, then the printer searches for
another source, and continues the job.
Some media types, such as transparencies, labels, and envelopes must be
supplied from the Multipurpose tray. Ensure that the paper is properly loaded
by following the instructions outlined in the printing system's Operation Guide.
Note: Source and Media type are separate items in the dialog box, but can
be combined using the Combine source and media type lists setting in
Device Settings > Compatibility. If they are combined, Media type is
unavailable on the Basic tab, and media types can be selected in the Source
list.
Destination
With this feature, you can specify which output tray is used for the print job
output.
Copies
With this feature, you can specify the number of copies to print. You can print up
to 999 copies.
Carbon Copies
With this feature, you can print additional copies on paper from different trays or
cassettes. This is useful for printing copies of documents such as invoices on
different colored paper or media type. The maximum number of copies can be
printed for each carbon copy.
You can use the Prologue/Epilogue feature in the Advanced tab to add a logo
or heading to each carbon copy.
When Carbon copies is selected, Batch copies, Booklet in the Layout tab,
and all the features in the Publishing tab are unavailable.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
