Device Settings
User Guide3-22
2
Click OK in all dialog boxes.
Combine Source and Media Type Lists
With this feature, you can change the driver's Basic tab so that Media type and
Source are combined into one list, labeled Source. In the combined list, Media
types are listed first, followed by cassettes and Multipurpose tray.
Creating a Combined Source List
1
In Device Settings > Compatibility, select Combine source and media type
lists.
2
Click OK in all dialog boxes.
Removing a Plug-in
You can remove an installed plug-in from the driver. If removed, the plug-in
features do not appear in the driver interface.
Note: To remove the Output to PDF module, PDF must not be selected as
the PDL.
1
In Device Settings, click Kyocera logo > Plug-in.
2
Select a plug-in module from the list and click Delete, then Yes.
3
Click OK in all dialog boxes.
To Next Page
Loading...
