Job
Printer Driver 10-2
Job Storage (e-MPS) options
Storage location Access code
required
When job is
printed
When job is
deleted from
memory
Custom box SSD Optional password When printed from
operation panel
When manually
deleted or up to 31
days
Quick copy SSD or SD card No When sent from the
computer
When printing
system is turned
off, or storage
device is full, or job
retention date has
passed
Proof and hold SSD, RAM disk, or
SD card
No One print when job
is sent; remaining
prints later
When printing
system is turned
off, or job retention
date has passed
Private print SSD, RAM disk, or
SD card
Yes When access code
is entered at
operation panel
When printing
system is turned
off, or after printing,
or job retention
date has passed
Job storage SSD or SD card Optional When printed from
operation panel
When manually
deleted
Custom Box
With this feature, you can store print jobs until they are printed from the printing
system's operation panel. You can print one or more jobs from the storage
device.
Print jobs can be deleted after printing or saved on the storage device for 1-31
days.
Custom boxes must be set up for each user at the printing system's home page
and in the SSD Settings dialog box, accessed from Device Settings. The
maximum number of custom boxes is 1000.
Storing a Job in a Custom Box
1
In the Job tab, click the Job storage (e-MPS) icon.
2
In the Type list, select Custom box.
3
Click Settings.
4
Select a Custom Box Settings option:
Select Use specific box number, and type the box number and password.
Select Prompt for box number, and click OK. When starting to print, the
Custom Box dialog box appears. Type a box number from the Defined
custom boxes list. If a password was set, type the password.
Select Display box number list, and click OK. When starting to print, the
Custom Box dialog box appears. Select a box from the list. If a password
To Next Page
Loading...
