2-31
Installing and Setting up the Machine > Installing Software
3
Select [Custom Install].
4
Install the software.
1 Select the device to be installed.
2 Select the driver to be installed.
If Wi-Fi or Wi-Fi Direct is enabled, be sure to specify the IP address for the port name. Installation may fail if the
host name is specified.
• The machine cannot be detected unless it is on. If the computer fails to detect the machine, verify that it is
connected to the computer via a network cable and that it is turned on and click (Refresh). Click (Update).
• If the desired device does not appear, select [Add custom device] to display the list, and select the desired
device.
To Next Page
Loading...
