6-26
Advanced Function Settings > [Combine]
[Combine]
Combines 2 or 4 original sheets into 1 printed page.
You can select the page layout and the type of boundary lines around the pages.
The following types of the boundary lines are available.
Item Value Description
Off
—
Disables the function.
2 in 1 — Prints a two-sheet original on a single
sheet.
4 in 1 — Prints a four-sheet original on a single
sheet.
Others Combine Off, 2 in 1 (L to R/T to B), 2 in 1 (R to L/B
to T), 4 in 1 (Right then Down), 4 in 1
(Left then Down), 4 in 1 (Down then
Right), 4 in 1 (Down then Left)
Select how to lay out the pages of
scanned original.
Border Line None, Solid Line, Dotted Line,
Positioning Mark
Select the boundary line type.
Original Orientation Top Edge on Top, Top Edge on Left Select the orientation of the original
document top edge to scan correct
direction.
None Solid Line Dotted Line Positioning Mark
To Next Page
Loading...
