Kyocera ECOSYS M4125idn

2-9
Installing and Setting up the Machine > Connecting cable
Connecting cable
Connecting LAN Cable
1
Connect the cable to the machine.
1 Connect the LAN cable to the network interface connector.
2 Connect the other end of the cable to the hub.
2
Configuring Network Settings
Network settings (2-13)
Connecting USB Cable
1
Connect the cable to the machine.
1 Connect the USB cable to the USB interface connector located on the left side of the body.
2 Connect the other end of the cable to the PC.
Connecting the Power Cable
1
Connect the cable to the machine.
Connect one end of the supplied power cable to the machine and the other end to a power outlet.
IMPORTANT
Only use the power cable that comes with the machine.