Kyocera ECOSYS M4125idn

8-32
System Menu > [System/Network]
[System/Network]
Configures machine system settings.
[Network]
Configures network settings.
[Host Name]
Menu Transition: [System Menu / Counter] key > [System/Network] > [Network] > [Host Name]
[Wi-Fi Direct Settings]
Menu Transition: [System Menu / Counter] key > [System/Network] > [Network] > [Wi-Fi Direct Settings]
Configure Wi-Fi Direct settings.
Item Description
Host Name Check the host name of the machine. Host name can be changed from .
Changing Device Information
(2-44)
NOTE
This function is displayed when the Wireless Network Interface Kit (IB-36) is installed.
The Wireless Network Interface Kit is an option for some models. Contact your dealer or our sales or service
representatives for detail.
IB-36 <Wireless Network Interface Kit> (12-3)
Item Description
Wi-Fi Direct Select whether to use Wi-Fi Direct.
Value: Off, On
Device Name Configure the device name setting.
NOTE
Up to 32 characters can be entered.
This function is displayed when [On] is selected for the Wi-Fi Direct setting.
IP Address Use this to check the machine IP address.
[TCP/IP Setting] (8-37)
Value: ###.###.###.###
NOTE
If [On] is selected, set the time until the job is skipped.
This function is displayed when [On] is selected for the Wi-Fi Direct setting.
Auto Disconnect Automatically disconnects devices connected by Wi-Fi Direct.
Value: Off, On
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be
entered.