8-20
System Menu > [Common Settings]
[Low Toner Alert]
Menu Transition: [System Menu / Counter] key > [Common Settings] > [Low Toner Alert]
[Keyboard Layout]
Menu transition: [System Menu / Counter] key > [Common Settings] > [Keyboard Layout]
[USB Keyboard Type]
Menu transition: [System Menu / Counter] key > [Common Settings] > [USB Keyboard Type]
[Offset Documents by Job]
Menu Transition: [System Menu / Counter] key > [Common Settings] > [Offset Documents by Job]
Set the display method of the Status/Log.
[Offset One Page Documents]
Menu Transition: [System Menu / Counter] key > [Common Settings] > [Offset One Page Documents]
Item Description
Low Toner Alert Set the amount of remaining toner to notify the administrator when to order a toner
when the toner is running low. This notification is used for event report, Status Monitor,
SNMP Trap.
Value: Off, On
If [On] is selected, set the amount of remaining toner to alert. The setting range is 5 to
100% (in 1% increments).
Item Description
Keyboard Layout Change the layout of the touch panel keyboard used to enter characters.
Value: QWERTY, QWERTZ, AZERTY
Item Description
USB Keyboard Type Select the type of USB keyboard that you want to use.
Value: US-English, US-English with Euro, French, German, British English
Item Description
Offset Documents by Job Select whether to offset documents by Job.
Value: Off, On
This function is displayed when an optional Document Finisher is installed.
Item Description
Offset One Page Documents Set whether one-page documents are sorted.
Value: Off, On
This function is displayed when an optional Document Finisher is installed.
To Next Page
Loading...
