Kyocera ECOSYS M4125idn

9-23
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
2 [User Login Settings] > [Simple Login Settings] > [Simple Login Setup]
2
Enter the user information.
1 Select the key to which you want to register a user.
2 Select [ ].
\
3 To specify the user from local users, select [Local User]. To specify from network users, select [Network User].
The procedure differs depending on the transmission method selected.
Specifying the user from local users
Select the user to be set for simple login.
Specifying the user from network users
Select [Keyboard] of [Login User Name] and [Login Password], enter the information of the user to be registered, and
select [OK].
If you are specifying a user for whom a domain is set in network authentication, select the "Domain Name" and select the
domain where the user is registered.
Select [Next >].
4 Enter the user name to be displayed, select [Next >].
5 [Password Login] > [On] or [Off] > "Icon"
NOTE
• To sort the user list, select [Menu] > [Sort (Name)] or [Sort (Login User Name)].
• Select [Menu] > [Search(Name)] or [Search (Login User Name)] to search by account name or account ID.
NOTE
For details on entering characters, refer to the the following:
Character Entry Method (12-11)
NOTE
For details on entering characters, refer to the information below.
Character Entry Method (12-11)
10:10
Menu
System Menu/Counter.
01
04
07
02
05
08
03
06
09
1/3
Simple login settings - Simple Login Setup
End
None None None
None None None
None None None
Add - Network User
10:10
Keyboard
Login Password
Keyboard
Login User Name
< Back Next >Cancel
System Menu/Counter.