Basic Operation
3-26
4
Enter the destination e-mail address.
NOTE: Destination can be specified using the
Address Book or the One-touch keys. Refer to
Specifying Destination on page 3-41.
5
Press the
OK
key. Completed. is displayed and the
screen returns to the basic screen.
NOTE: If the screen for confirming the entry of a new
destination (page 8-77
) is set to [On], a screen to
confirm the entered e-mail address appears. Enter the
same e-mail address again and press the
OK
key.
6
If there are additional destinations, press the
Confirm/Add Destination
key. Repeat steps 2 to
5 to enter additional destinations. Up to 100
destinations can be specified.
Press [Exit] (the
Right Select
key) to return to the
basic screen.
Press the
Confirm/Add Destination
key to
confirm or delete the registered destinations.
Press the ļ² or ļ³ key to select a destination and
press the
OK
key. Then, you can edit or delete the
destination.
Press [Exit] (the
Right Select
key) to return to the
basic screen.
7
Press the
Start
key. Transmission starts.
NOTE: If the screen for confirming the destination
before transmission (page 8-77
) is set to [On], the
Confirm Destination screen appears when the
Start
key is pressed. For more information, refer to Confirm
Destination Screen on page 3-40.
To Next Page
Loading...
Need help?
General
