Kyocera ECOSYS M6026cdn Type B User Manual

Default Setting (System Menu)
8-149
8
Low Power Timer
The time until the machine enters low power mode can be set. The range that can be set is as follows.
Use the procedure below to set the Low Power Timer. The default setting is 1 minute.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the  or  key to select [Timer Setting], and
press the
OK key.
A login screen will appear. Then, enter the user ID
and password with administrator privileges to log
in, and press [Login] (the
Right Select key).
4 The Timer Settings menu appears.
5 Press the  or  key to select [Low Power Timer].
Value
For Europe
30 ppm model: 1 to 60 minutes (1minute increments)
35 ppm model: 1 to 120 minutes (1minute increments)
Except for Europe
1 to 240 minutes (1minute increments)
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Login User Name: L b
*******************
Login Password:
[ Login ]
Timer Setting: a b
*********************
2 PanelReset Timer
3 Low Power Timer
[ Exit ]
1 Auto Panel Reset

Kyocera ECOSYS M6026cdn Type B Specifications

General

Scan Resolution	600 x 600 dpi
Print Technology	Laser
Print Speed	26 ppm
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Copy Speed	26 ppm
Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	512 MB
Standard Interface	USB 2.0
Applicable OS	Windows
Scan Functions	Scan to Email
Mobile Printing	Yes