Default Setting (System Menu)
8-150
6
Press the
OK
key. Low Power Timer appears.
7
Press the ļ² or ļ³ key to set the Low Power Timer.
Set the amount of time before entering the Low
Power state in minutes. You cannot use the
numeric keys to enter this value.
8
Press the
OK
key.
Completed.
is displayed and the
screen returns to the Timer Settings menu.
Sleep Level (models except for Europe)
Detailed settings can be selected for sleep mode. Detailed settings for sleep mode are called Energy Saver
mode. When a function is set in Energy Saver mode and the function sends data to the machine, the machine
does not execute the function. When Quick Recovery is specified, the machine wakes from sleep mode when
any kind of data is received.
Example: When print data is sent from a PC connected by Network
Use the procedure below to specify the Sleep Level.
1
In the Sys. Menu/Count. menu, press the ļ² or ļ³
key to select [Common Settings].
2
Press the
OK
key. The Common Settings menu
appears.
3
Press the ļ² or ļ³ key to select [Timer Setting], and
press the
OK
key.
Quick Recovery
When the machine receives print data, it wakes from sleep mode and starts
printing.
Energy Saver
The machine does not wake from sleep mode when it receives print data and
printing does not take place.
To Next Page
Loading...
Need help?
General
