2RV/2RW/2RX/2RY/3RA
6-8
(50) Auto cassette change 0: OFF
1: ON (Default)
(51) Color printing double count mode 0: All single counts
3: Folio (Less than 330 mm length), Single counts
(52) Black and white printing double count
mode
0: All single counts
3: Folio (Less than 330 mm length), Single counts
(53) Billing counts timing 0: When secondary paper feed starts
1: When the paper is ejected
(54) Temperature (machine inside) -
(55) Temperature (machine outside) -
(56) Relative humidity (machine outside) -
(57) Absolute humidity (machine outside) -
(58) LSU temperature information -
(59) LSU2 temperature information -
(60) DRT information -
(61) Asset Number -
(62) Job end judgment time-out time -
(63) Job end detection mode 0: Detects as one job, even if contained multiple jobs
1: Detects as individual job, dividing multiple jobs at a
break in job
(64) Prescribe environment reset 0: Off
1: On
(65) Media type attributes
1 to 28 (Not used: 18, 19, 20)
*: For details on settings, refer to
MDAT command in "Prescribe
Commands Reference Manual".
Weight settings Fuser settings
0: Light 0: High
1: Normal 1 1: Middle
2: Normal 2 2: Low
3: Normal 3 3: Vellum
4: Heavy 1
5: Heavy 2 Duplex settings
6: Heavy 3 0: Disable
7: Extra Heavy 1: Enable
(66) IO Calibration information K/C/M/Y
(67) Bias Calibration information -
(68) Calibration information -
(69) Sensor initial information -
(70) Calibration information -
(71) Calibration information -
(72) Calibration information -
(73) Calibration information -
(74) Paper loop correction shift amount -
(75) Paper loop correction interval -
(76) Paper loop correction patch amount -
(77) Calibration information -
No. Items Contents
To Next Page
Loading...
