Kyocera ECOSYS P2040dn

2RV/2RW/2RX/2RY/3RA
3-22
(1-2) MP tray paper feed section
The MP tray can load 60 sheets paper (64 g/m
2
) or 50 sheets (80 g/m
2
). The paper on the MP tray is fed by
rotating the MP paper feed roller while lifting up the MP bottom plate by the MP solenoid. Multi-feeding is
also prevented by the effect of the MP separation pad.
The fed paper is conveyed by the MP feed roller to the position where it turns the registration sensor on.
Components parts
1. MP paper feed roller
2. MP separation pad
3. MP friction plate
4. MP bottom plate
5. MP paper width guides
6. MP tray
7. MP tray sub
8. MP actuator
(MP paper sensor )
Figure 3-19
Figure 3-20
1
23
6
7
5 4 8
1
5
4
8
3
5
7
2
6