EasyManua.ls Logo

Kyocera ECOSYS P2040dn

Kyocera ECOSYS P2040dn
358 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2RV/2RW/2RX/2RY/3RA-3
7-33
J0509 No paper feed from the MP
tray
Condition: Paper is damaged (Paper is caught
up, the paper conveying force is lowered or paper
slips).
J0509 No paper feed from the MP
tray
Condition: Paper is not damaged (The MP bottom
plate does not ascend or feed drive does not
start).
J0511 Multi feed jam
J0512/J0513 Multi feed jam
J0518 Multi-feeding from the duplex
section
J0519 Multi-feeding from the MP
tray
J1403 PF feed sensor non-arrival
jam
Target: Paper feeder 2
Condition: Paper is not damaged (Paper feed
does not start or the PF conveying clutch does
not operate properly).
J1403 PF feed sensor non-arrival
jam
Target: Paper feeder 2
Condition: Paper is damaged (Paper is caught
up, the paper conveying force is lowered or paper
slips).
J1413 PF feed sensor stay jam Target: Paper feeder 2
J4002/J4003 Registration sensor non-
arrival jam
Condition: Paper is damaged.
J4002/J4003 Registration sensor non-
arrival jam
Condition: Paper is not damaged. (The PF con-
veying roller does not rotate properly. The PF
conveying clutch does not operate properly.)
J4008 Registration sensor non-
arrival jam
J4012/J4013/J4018 Registration sensor stay jam
J4201/J4202/J4203/
J4208/J4209
Exit sensor non-arrival jam Condition: Paper jam before the fuser section
J4201/J4202/J4203/
J4208/J4209
Exit sensor non-arrival jam Condition: Paper jam in the fuser section
J4201/J4202/J4203/
J4208/J4209
Exit sensor non-arrival jam Condition: Paper rolled up on the fuser roller
(leading edge margin less than 4.0mm)
J4201/J4202/J4203/
J4208/J4209
Exit sensor non-arrival jam Condition: Paper rolled up on the fuser roller
(leading edge margin 4.0mm or more)
J4201/J4202/J4203/
J4208/J4209
Exit sensor non-arrival jam Condition: Paper jam after passing the lower exit
roller
J4211/J4212/J4213/
J4218/J4219
Exit sensor stay jam Condition: Paper jam in the fuser section
J4211/J4212/J4213/
J4218/J4219
Exit sensor stay jam Condition: Paper jam in the exit unit
J4211/J4212/J4213/
J4218/J4219
Exit sensor stay jam Condition: Paper jam at FD guide
Error code Contents note

Table of Contents

Other manuals for Kyocera ECOSYS P2040dn

Related product manuals