Kyocera FS-1024MFP - Page 190

Default Setting (System Menu)
8-44 OPERATION GUIDE
The table below lists the additional information available.
NOTE:
• Refer to page 4-12 for name entry.
• Refer to Character Entry Method on Appendix-2 for details on entering characters.
Use the procedure below to set the default file name.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Function Default].
4 Press the OK key. The Function Default menu
appears.
5 Press the U or V key to select [File Name Entry].
Item Description
None No additional information available.
Date Adds date and time.
Job No. Adds the job number.
Job No. + Date Adds the job number plus date and time.
Date + Job No. Adds date and time plus the job number.
Sys. Menu/Count.: a b
3 System
4 Administrator
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection