Kyocera FS-1024MFP - Page 191

Default Setting (System Menu)
OPERATION GUIDE 8-45
8
6 Press the OK key. File Name Entry appears. Enter
the document name (up to 32 characters).
7 Press the OK key. Additional Info appears.
8 Press the U or V key to select [None], [Date],
[JobNo.], [JobNo. + Date] or [Date + JobNo.].
9 Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Continuous Scan
Set the continuous scan defaults. The available default settings are shown below.
Refer to page 4-4 for Original Orientation.
Use the procedure below to select the default settings for continuous scanning.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Function Default].
File name Entry: A b
doc 1
*
S
ABC
[ Text ]
Additional Info.: a b
1 None
*********************
3 Job No.
2 *Date
Item Description
Off Continuous scan not performed
On Continuous scan performed
Sys. Menu/Count.: a b
3 System
4 Administrator
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language