Kyocera FS-1024MFP - Page 194

Default Setting (System Menu)
8-48 OPERATION GUIDE
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Function Default].
4 Press the OK key. The Function Default menu
appears.
5 Press the U or V key to select [Detail Setting].
6 Press the OK key. The Detail Setting menu
appears.
7 Press the U or V key to select [2 in 1 Layout].
8 Press the OK key. 2 in 1 Layout appears.
9 Press the U or V key to select [g L to R f T to
B] or [e R to L].
10 Press the OK key. Completed. is displayed and the
screen returns to the Detail Setting menu.
4 in 1 Layout
Select the default value for layout when [4 in 1] is selected for Combine. Items available for the default value are
as follows:
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Detail Setting: a b
*********************
2 4 in 1 Layout
3 Border Line
[ Exit ]
1 2 in 1 layout
2 in 1 Layout a b
*********************
2 e R to L
1 * g L to R f T to B
Item Description
h Right then Down Arranges from upper left to right.
i Down then Right Arranges from upper left to bottom.