Kyocera FS-1024MFP - Page 195

Default Setting (System Menu)
OPERATION GUIDE 8-49
8
Use the procedure below to select the default value for layout.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Function Default].
4 Press the OK key. The Function Default menu
appears.
5 Press the U or V key to select [Detail Setting].
6 Press the OK key. The Detail Setting menu
appears.
7 Press the U or V key to select [4 in 1 Layout].
8 Press the OK key. 4 in 1 Layout appears.
j Left then Down Arranges from upper right to left.
k Down then Left Arranges from upper right to bottom.
Item Description
Sys. Menu/Count.: a b
3 System
4 Administrator
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Detail Setting: a b
*********************
2 4 in 1 Layout
3 Border Line
[ Exit ]
1 2 in 1 layout
4 in 1 Layout: a b
*********************
2 i Down then Right
3 j Left then Down
1 * h Right then Down