Kyocera FS-1024MFP

Default Setting (System Menu)
8-72 OPERATION GUIDE
6 Press the OK key. This displays the density
selection screen for the mode selected in step 5.
The screen shown is the one when [Manual] is
selected.
7 Press the U or V key to select the density from [-3
Lighter] to [+3 Darker].
8 Press the OK key. Completed. is displayed and the
screen returns to Copy Denst. Adj. menu.
Send/USB Density
Adjust scan density when storing the data in USB Memory. Adjustment can be made in 7 levels both in auto and
manual density modes.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu
appears.
3 Press the U or V key to select [Send/USB
Density].
4 Press the OK key. Send/USB Density appears.
5 Press the U or V key to select [Auto] or [Manual].
Manual: a b
3 -1
*********************
5 +1
4 * 0 Normal
Sys. Menu/Count.: a b
9 USB Memory
: Edit Destinations
*********************
[ Exit ]
; Adjust/maint.
Adjust/Maint.: a b
*********************
2 Send/USB Density
3 Correct. Bk Line
[ Exit ]
1 Copy Denst. Adj.
Send/USB Density: a b
*********************
2 Manual
[ Exit ]
1 Auto