Why are my Kyocera FS-1024MFP All in One Printer printouts fuzzy?
If your Kyocera All in One Printer printouts are fuzzy, it might be because the machine is being used in very humid conditions. Clean the charger wire.
What does 'Error occurred. Turn the main power switch off and on' mean on Kyocera All in One Printer?
If your Kyocera All in One Printer displays 'Error occurred. Turn the main power switch off and on', a system error has occurred. Turn the main power switch off and on.
How to improve print clarity on Kyocera FS-1024MFP All in One Printer?
To improve print clarity on your Kyocera All in One Printer, select the appropriate image quality for the original.
What does 'Memory is full. Print job cannot be processed completely' mean on Kyocera FS-1024MFP All in One Printer?
If your Kyocera All in One Printer displays 'Memory is full. Print job cannot be processed completely', the job cannot continue as the memory is used up. Press the OK key to print the scanned pages. The print job cannot be processed completely. Press the Stop key to cancel the job.
What does 'Insufficient memory. Cannot start the job' mean on Kyocera FS-1024MFP?
If your Kyocera All in One Printer displays 'Insufficient memory. Cannot start the job', further scanning cannot be performed due to insufficient memory. Press the OK key to print the scanned pages. Press the Cancel key to cancel the printing job.
What does 'Top tray is full of Paper. Remove the paper' mean on Kyocera FS-1024MFP?
If your Kyocera All in One Printer displays 'Top tray is full of Paper. Remove the paper', remove paper from the top tray, and press the OK key to resume the job.
How to adjust print darkness on Kyocera FS-1024MFP?
To adjust print darkness on your Kyocera All in One Printer: * If the machine is in Auto Density mode, set the correct density level for auto density. * If the machine is in Manual Density mode, select the correct density level. * When changing the default density level, adjust the density manually and choose the desired level.
How to clean Kyocera FS-1024MFP dirty printouts?
To resolve dirty printouts on your Kyocera All in One Printer: * Clean the platen or the document processor if they are dirty. * Clean the charger wire.
Why does my Kyocera All in One Printer keep jamming paper?
If your Kyocera All in One Printer is experiencing frequent paper jams: * Ensure the paper is loaded correctly. * Check if the paper is of the supported type and in good condition. Try removing the paper, turning it over, and reloading it. * Make sure the paper isn't curled, folded, or wrinkled; if it is, replace it with new paper. * Check for and remove any loose scraps or jammed paper inside the machine.
How to fix light printouts on Kyocera All in One Printer?
If your printouts are too light, consider the following: * If the machine is in Manual Density mode, select the correct density level. * When changing the default density level, adjust the density manually and choose the desired level. * Shake the toner container from side to side several times to distribute the toner evenly. * If there's a message indicating the addition of toner, replace the toner container. * If the paper is damp, replace it with new paper. * If EcoPrint mode is enabled, disable it.
General| Print Technology | Laser |
|---|---|
| Print Speed (Black) | 24 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 30, 000 pages |
| Scan Resolution | 600 x 600 dpi |
| Copy Speed | 24 cpm |
| Connectivity | USB 2.0 |
| Copying | Yes |
| Maximum copy resolution | 600 x 600 dpi |
| Scanning | Yes |
| Optical scanning resolution | 600 x 600 dpi |
| Maximum scan area | 216 x 356 mm |
| Faxing | Yes |
| Standard input capacity | 250 sheets |
| Multi-purpose tray capacity | 50 sheets |
| Maximum input capacity | 300 sheets |
| Standard output capacity | 150 sheets |
| Maximum output capacity | 150 sheets |
| Internal memory | 64 MB |
| Product color | White |
| Maximum Paper Size | A4 |
| Functions | Print, Copy, Scan, Fax |
| Scan Type | Flatbed, ADF |
| Operating System Compatibility | Windows, Mac |
| Time to first copy (black, normal) | 12 seconds |
| Standard paper tray media types | Plain paper |
| Warm-up time | Less than 30 seconds |
Identifies and describes the keys and displays on the machine's operation panel.
Explains connection methods and necessary cables for PC interaction.
Provides step-by-step instructions for connecting the machine to a PC.
Details the procedure for installing printer drivers and software on a Windows PC.
Explains how to load paper into the cassette and manual feed tray.
Describes how to place originals on the platen or in the document processor.
Explains how to turn the machine's power on and off.
Provides steps for performing basic copying operations.
Guides users on how to print documents from computer applications.
Explains how to send scanned images to a PC via USB.
Describes how to select destinations from the Address Book or One-Touch keys.
Details the procedure for canceling print or send jobs.
Explains scanning documents using TWAIN or WIA compatible applications.
Details how to store scanned image files onto USB memory.
Allows checking the status of jobs being processed or waiting.
Explains procedures for cleaning the glass platen and interior machine parts.
Provides instructions for replacing the toner container.
Provides a table of common symptoms, checkpoints, and corrective actions for issues.
Lists error messages and guides users on how to respond to them.
Explains how to clear paper jams from various locations in the machine.
To Next Page
