Kyocera FS-1028MFP

Copying Functions
OPERATION GUIDE 4-9
4
Use the procedure below to select the orientation when placing the originals on the platen.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press the Function Menu key. Function Menu
appears.
4 Press the U or V key to select [Orig.Orientation].
5 Press the OK key. Orig.Orientation appears.
6 Press the U or V key to select [Top Edge Top] or
[Top Edge Left].
7 Press the OK key.
Completed. is displayed and the screen returns to
the basic screen for copying.
8 Press the Start key to start copying.
Function Menu: a b
*********************
2 Collate T
3
Duplex T
[ Exit ]
1 Paper Selection g
Orig.Orientation: a b
1 c Top Edge Top
*********************
2 * d Top Edge Left