Status / Job Cancel
OPERATION GUIDE 7-17
7
1 In the Job Log History menu, press the U or V key
to select [Send History].
2 Press the OK key. A confirmation screen appears.
IMPORTANT: If no destination is registered, Enter
destination is displayed. Refer to Registering
Destination on page 7-15 and register the desired
destination
3 Press [Yes] (the Left Select key). Accepted. is
displayed and the job log is sent to the registered
destination before the screen returns to the Job
Log History menu.
Setting E-mail Subject
Set the subject automatically entered when sending job log histories by e-mail.
Use the procedure below to set the subject.
1 In the Job Log History menu, press the U or V key
to select [Subject].
2 Press the OK key. Subject appears.
NOTE: Refer to Character Entry Method on Appendix-
5 for details on entering characters.
3 Enter the destination address.
To Next Page
Loading...
