Kyocera FS-1028MFP

Default Setting (System Menu)
OPERATION GUIDE 8-11
8
Adding a Custom Size for Paper to Print
Set up a frequently-used custom paper size. The custom size options are displayed on the screen to select
paper.
The table below lists the sizes that can be registered.
Custom paper sizes can be added for each paper source.
Use the procedure below to select a custom paper size.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Orig./Paper Set.].
Input units Dimensions
Inch models Cassette: X: 4.13 to 8.50" (in 0.01" increments)
Y: 5.83 to 14.02" (in 0.01" increments)
Paper Feeder PF-100: X: 5.83 to 8.50" (in 0.01" increments)
Y: 8.27 to 14.02" (in 0.01" increments)
MP Tray: X: 2.75 to 8.50" (in 0.01" increments)
Y: 5.83 to 14.02" (in 0.01" increments)
Metric models Cassette: X: 105 to 216 (in 1 mm increments)
Y: 148 to 356 (in 1 mm increments)
Paper Feeder PF-100: X: 148 to 216 (in 1 mm increments)
Y: 210 to 356 (in 1 mm increments)
MP Tray: X: 70 to 216 (in 1 mm increments)
Y: 148 to 356 (in 1 mm increments)
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
****************** ***
[ Exit ]
6 Common Settings
Common Settings: a b
****************** ***
2 Default Screen
3 Sound
[ Exit ]
1 Language