Kyocera FS-1028MFP

Default Setting (System Menu)
OPERATION GUIDE 8-69
8
Use the procedure below to select the emulation.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the U or V key to select [Emuration Set.].
4 Press the OK key. Emuration Set. appears.
5 Press the U or V key to select the printer you want
to emulate.
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
NOTE: If you select [KPDL] or [KPDL(Auto)], the
operation after selecting the emulation is different from
others.
If you select [KPDL], refer to page 8-70.
If you select [KPDL(Auto)], refer to page 8-70.
Sys. Menu/Count.: a b
7 Copy
*********************
9 Send
[ Exit ]
8 Printer
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
Emulation Set.: a b
5 PCL6
6 KPDL
*********************
7 *KPDL(Auto)