Kyocera FS-1028MFP - Page 270

Default Setting (System Menu)
8-78 OPERATION GUIDE
Use the procedure below to specify a CR action.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the U or V key to select [CR Action].
4 Press the OK key.
5 Press the U or V key to select [CR Only], [LF and
CR] or [Ignore CR].
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Paper Feed Mode
Set the default value of the paper feed direction used for the printer functions. The default setting is Auto.
Sys. Menu/Count.: a b
7 Copy
*********************
9 Send
[ Exit ]
8 Printer
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
CR Action: a b
*********************
2 LF and CR
3 Ignore CR
1 *CR Only
Item Description
Auto Sets the paper feed direction automatically.
Fixed Sets the paper feed direction the same as
in the previous printing operation.