Kyocera FS-1028MFP

Default Setting (System Menu)
OPERATION GUIDE 8-101
8
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
4 The Timer Settings menu appears.
5 Press the U or V key to select [Auto Err. Clear].
6 Press the OK key. Auto Err. Clear appears.
7 Press the U or V key to select [Off] or [On].
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options
are between 5 and 495 seconds (every five seconds). The default setting is 30 minutes.
If you set 0 as the time, errors are not displayed.
NOTE: If you select [Off] for Auto Error Clear, the time display does not appear.
Use the procedure below to set the automatic error clear delay.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
Login User Name: L b
*******************
Login Password:
[ Login ]
Timer Setting: a b
*********************
2 Sleep Timer
3 PanelReset Timer
[ Exit ]
1 Err. Clear Timer
Auto Err. Clear: a b
*********************
2 On
1 *Off
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
6 Common Settings