Kyocera FS-1028MFP

Default Setting (System Menu)
8-104 OPERATION GUIDE
Sleep Timer
If you select [On] for Auto Sleep, set the amount of time to wait before Auto Sleep. Options are between 1 and
240 minutes (every one minute)
Use the procedure below to set the Auto Sleep time. The default setting is 15 minutes.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Timer Setting], and
press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
4 The Timer Settings menu appears.
5 Press the U or V key to select [Sleep Timer].
6 Press the OK key. Sleep Timer appears.
7 Press the U or V key to set the Sleep Timer. Set
the amount of time before entering the sleep state
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Login User Name: L b
*******************
Login Password:
[ Login ]
Timer Setting: a b
*********************
2 Sleep Timer
3 PanelReset Timer
[ Exit ]
1 Err. Clear Timer
Sleep Timer: D b
(1 - 240)
******15* min.