Kyocera FS-1028MFP

Default Setting (System Menu)
OPERATION GUIDE 8-115
8
4 Press the OK key. Path appears.
5 Enter the path name.
6 Press the OK key. Login User Name appears.
7 Enter the login user name.
8 Press the OK key. Login Password appears.
9 Enter the login password.
10 Press the OK key. A confirmation screen appears.
NOTE: If the screen for confirming the entry of a new
destination (page 8-65) is set to [On], screens to
confirm the entered host name and path name appear.
Enter the same host name and path name again and
press the OK key on their respective screens.
Path: A b
SD3\report
*
ABC
[ Text ]
Login User Name: A b
Maury
* S
ABC
[ Text ]
Login Password: A b
OOOOOOOOOOO *
ABC
[ Text ]
Check the connection.
Are you sure?
[ Yes ] [ No ]