Kyocera FS-1028MFP - Page 325

Default Setting (System Menu)
OPERATION GUIDE 8-133
8
3 Press the U or V key to select [Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the U or V key to select [WSD-PRINT].
6 Press the OK key. The WSD-PRINT menu
appears.
7 Press the U or V key to select [On] or [Off].
8 Press the OK key. Completed. is displayed and the
screen returns to the Network Settings menu.
Network Setting: a b
*********************
2 NetWare
3 AppleTalk
[ Exit ]
1 TCP/IP Settings
WSD-PRINT: a b
*********************
2 On
1 *Off