Kyocera FS-1028MFP

Default Setting (System Menu)
8-136 OPERATION GUIDE
6 Press the OK key. The TCP/IP Settings menu
appears.
7 Press the U or V key to select [Protocol Detail].
8 Press the OK key. The Protocol Detail menu
appears.
9 Press the U or V key to select the item for which
you want to make settings.
10 Press the OK key. This displays the setting screen
for the item selected in step 9.
The screen shown is the one when [FTP(Client)] is
selected.
11 Press the U or V key to select [On] or [Off].
If you select [On] for each of [FTP(Client)] and [IPP]
and press the OK key, a port number entry screen
appears.
Press the U or V key or the numeric keys to set the
port number.
12 Press the OK key. Completed. is displayed and the
screen returns to the Protocol Detail menu.
TCP/IP Settings: a b
2 IPv4 Setting
3 IPv6 Setting
*********************
[ Exit ]
4 Protocol Detail
Protocol Detail: a b
*********************
2 SNMPv3
3 FTP(Server)
[ Exit ]
1 NetBEUI
FTP(Client) : a b
*********************
2 On
1 *Off
Port Number : D b
(1 - 65535)
*******21*