Kyocera FS-1028MFP - Page 395

Management
OPERATION GUIDE 11-27
11
If you select [Counter Limit], enter the upper limit
number of pages in the next screen, and then press
the OK key.
5 Repeat step 3 to 4 to set items as necessary.
6 Press the OK key again. A confirmation screen
appears.
7 Press [Yes] (the Left Select key). The restriction of
use is changed. Registered. is displayed and the
screen returns to Account. List.
Applying Limit of Restriction
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
Use the procedure below to apply the restriction limit.
1 Press the System Menu/Counter key on the main
unit operation panel.
2 In the Sys. Menu/Count. menu, press the U or V
key to select [User/Job Account], and then press
the OK key.
Limit Pages: D b
(1 - 9999999)
**123456* pages
Overwrite.
Are you sure?
z k Osaka GUI DESIGN
[ Yes ] [ No ]
Item Description
Immediately *
* The next job will be prohibited in sending or in storing in the box.
Job stops when the counter reaches its limit.
Subsequently Printing/scanning of the job continues but the
subsequent job will be rejected.
Alert Only Job continues while displaying an alert message.
Sys. Menu/Count.: a b
*********************
2 User Property
3 Common Settings
[ Exit ]
1 User/Job Account