Kyocera FS-1028MFP

Management
11-30 OPERATION GUIDE
2 In the Sys. Menu/Count. menu, press the U or V
key to select [User/Job Account], and then press
the OK key.
3 If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
NOTE: Refer to Character Entry Method on Appendix-
5 for details on entering characters.
4 In the User/Job Account menu, press the U or V
key to select [Job Account. Set.].
5 Press the OK key. The Job Account. Set. menu
appears.
6 Press the U or V key to select [Default Setting].
7 Press the OK key. The Default Setting menu
appears.
8 Press the U or V key to select [Counter Limit].
Sys. Menu/Count.: a b
*********************
2 User Property
3 Common Settings
[ Exit ]
1 User/Job Account
Login User Name L b
*******************
Login Password:
[ Login ]
User/Job Account: a b
1 User Login Set.
*********************
3 Unknown ID Job
[ Exit ]
2 Job Account.Set.
Job Account.Set.: a b
1 Each Job Account
2 Account. List
*********************
[ Exit ]
3 Default Setting
Default Setting: a b
*********************
2 Copy/Print Count
3 Counter Limit
[ Exit ]
1 Apply Limit