5 Host
The Host menu is used for managing printer drivers and print queues. In host
views, you can install, upgrade, or uninstall printer drivers on host computers,
and select login settings.
Adding Queues
You can use the Create Queue wizard to add queues to the Host Queue View
list.
1
In Host Queue View, click Host > New queue.
2
In the Create Queue wizard, select one or more hosts. Click Next.
If required, select a domain login option, and then click OK.
3
Select a printer model. Click Next.
4
Click Have disk, browse for a valid 32-bit or 64-bit .INF file (or both) for the
printer model, and click OK. Click Next.
5
Change available settings for each host. Clicking some options opens an
additional dialog box.
6
You can click Import to browse for a settings file (.KVP) for the selected driver,
or save your current settings by clicking Export.
7
You can click Common settings and apply some settings to all selected printer
models.
8
Click Conflicts, and select from available options.
9
After you have finished making changes on the Printer settings page, click
Next.
10
On the Confirm Settings page, confirm your selections.
11
Click Finish to create the new queue.
You can remove a queue by selecting it from the list and clicking Delete queue.
Common Settings Options
When creating a new queue or installing a printer, you can apply some settings
to all selected printer models by using the Common Settings feature. On the
KMnet Viewer 5.3
5-1
To Next Page
Loading...
Need help?
General