Kyocera FS-3040MFP User Guide

Device Settings
3
Click Printer properties (Windows 7) or Properties (Windows Vista, Windows
XP).
4
Click Device Settings.
Device Options
Optional devices extend the capabilities of your printing system for source.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
Setting Device Options
You can set the printer driver to match the optional devices installed on your
printing system.
1
In the Properties dialog box, click Device Settings.
2
In Device Settings > Device options, select the check boxes for all installed
devices.
Auto Configure
Auto Configure detects the devices installed on the printing system if it is
connected over a network. Auto Configure can detect printing system devices
such as input devices. When your computer is connected to the printing system
through a TCP/IP or WSD port, the Auto Configure button appears in Device
Settings. Auto Configure updates the Device options list, Memory, and
preview images to keep the printer driver consistent with the printing system
configuration.
Not all installed devices are detected by using Auto Configure. Before
selecting OK in Device Settings, check the settings to make sure that they are
correct.
Note: The default setting for Windows XP Service Pack 2 is for the Windows
Firewall to be set to On. The setting can be changed to allow communication
between the printing system and your computer. In the Windows Security
Alert dialog box, click Unblock.
Silent Auto Configuration
Silent auto configuration checks the printing system every 10 minutes for
changes in optional devices or memory. When a change is detected, the driver
is automatically updated with the new settings. Silent auto configuration is
only available for printing systems installed in Windows 7 or Windows Vista.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
Enabling Auto Configuration
The Auto Configure button can be used to detect all available device options
when the printing system is connected to a network through a TCP/IP port.
1
Verify that all optional devices are attached to the printing system, and that it is
turned on and ready to print.
KX DRIVER
2-2

Kyocera FS-3040MFP Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	40 ppm
Print speed (color, normal quality, A4/US Letter)	23 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	999 copies
Total input capacity	600 sheets
Total output capacity	500 sheets
Maximum input capacity	2100 sheets
Multi-Purpose tray input capacity	100 sheets
Display	LCD
Product color	Black, Grey
Market positioning	Business
Display number of lines	5 lines
Internal memory	256 MB
Maximum print size	216 x 297 mm
Paper tray media types	Bond paper, Envelopes, High resolution paper, Labels, Photo paper, Recycled paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Power requirements	120 - 240V
Networking features	Fast Ethernet
All-in-one functions	Copy, Scan
Compatible operating systems	Windows 7/2000/XP/2003/Vista/2008\\r Mac OS 10.x\\r Sun OS4.1.x; Solaris 2.x
Mobile printing technologies	-
Supported network protocols (IPv4)	TCP/IP, IPX/SPX, AppleTalk, NetBEUI
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	1
Power consumption (average operating)	440 W
Scan to	E-mail, FTP, USB
Grayscale levels	256
Image formats supported	JPG, TIF
Document formats supported	PDF
Maximum duty cycle	200000 pages per month
Fax memory	256 pages
Modem speed	33.6 Kbit/s
Fax transmission speed	3 sec/page
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	430 mm
Width	494 mm
Height	448 mm