Kyocera FS-3040MFP User Guide

Imaging
TrueType fonts are a type of scalable outline fonts. TrueType has long been
the most common format for fonts on Microsoft Windows.
System fonts are the primary fonts used by the operating system. They are
typically accessed through an application interface or through a common font
dialog box.
Device fonts are stored either permanently or temporarily in the printing
system memory.
Font Settings
The Font Settings dialog box lets you specify how TrueType fonts are sent to
the printing system. The chosen method affects the speed and quality of the
print job:
Download as outlines
This method is best suited for large documents or print jobs using multiple
fonts and font sizes. Print speeds are faster because of the optimization
features in this setting. The repetition of similar font data sent to the printing
system is reduced, thereby increasing the print speed. Print speed is not
increased when using Asian fonts such as Japanese, Chinese, and Korean,
because of the large amount of font information used for these particular
fonts.
Allow native download
This method improves text quality and increases print speed by converting
TrueType fonts to Adobe Type 42 font format. This feature is available when
KPDL is selected in the PDL Settings dialog box.
Download as bitmaps
Downloading fonts as bitmaps provides more detail, however it creates large
file sizes. This is best suited for print jobs with user-defined fonts, very small
fonts (point size 1-4), or Asian fonts.
Substitute with device fonts
System fonts and device fonts are automatically matched based on typeface
name. This function increases print speed and efficiency. It is useful for
changing a font used throughout a large document, by replacing the old font
with the desired font.
Note: GDI compatible mode does not support Substitute with device
fonts.
Selecting Font Settings
You can specify how TrueType fonts are sent to the printing system.
1
In Imaging > Font Settings, select one of the methods for sending TrueType
fonts.
2
Click OK to return to the Print dialog box.
3
Click OK to start printing.
Font Substitution
Font substitution is the process of using one font in place of another when the
intended font is not available to a printing system. Font substitution may be
KX DRIVER
6-3

Kyocera FS-3040MFP Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	40 ppm
Print speed (color, normal quality, A4/US Letter)	23 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	999 copies
Total input capacity	600 sheets
Total output capacity	500 sheets
Maximum input capacity	2100 sheets
Multi-Purpose tray input capacity	100 sheets
Display	LCD
Product color	Black, Grey
Market positioning	Business
Display number of lines	5 lines
Internal memory	256 MB
Maximum print size	216 x 297 mm
Paper tray media types	Bond paper, Envelopes, High resolution paper, Labels, Photo paper, Recycled paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Power requirements	120 - 240V
Networking features	Fast Ethernet
All-in-one functions	Copy, Scan
Compatible operating systems	Windows 7/2000/XP/2003/Vista/2008\\r Mac OS 10.x\\r Sun OS4.1.x; Solaris 2.x
Mobile printing technologies	-
Supported network protocols (IPv4)	TCP/IP, IPX/SPX, AppleTalk, NetBEUI
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	1
Power consumption (average operating)	440 W
Scan to	E-mail, FTP, USB
Grayscale levels	256
Image formats supported	JPG, TIF
Document formats supported	PDF
Maximum duty cycle	200000 pages per month
Fax memory	256 pages
Modem speed	33.6 Kbit/s
Fax transmission speed	3 sec/page
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	430 mm
Width	494 mm
Height	448 mm