2-41
Installing and Setting up the Machine > Installing Software
Setting Up the Scan Destination
When saving scan data in a folder other than "My Documents", Scan Destination needs to be configured in advance by
using KYOCERA Client Tool.
1
Start KYOCERA Client Tool.
Click [Start] button on the Windows and then select [All Programs], [Kyocera], [Client Tool]
and [KYOCERA Client Tool] to start KYOCERA Client Tool.
2
Display the screen.
Click [Scan Destination] on the [Device] tab.
3
Configure the settings.
1 Select the destination number (1 to 30).
2 Set a name for the destination. Up to 16 characters can be entered. This name is displayed
when you select a destination on the machine operation panel.
In Windows 8, select [Search] in charms, [Apps], and then [KYOCERA Client Tool].
To Next Page
Loading...
