Kyocera TASKalfa 2201 - Page 70

2-42
Installing and Setting up the Machine > Installing Software
3 Specified folder where the scanned image will be saved. To select the folder, click
[Browse] to open "Browse for Folder".
4 Click [Save].
When Connecting the Machine to the PC on the Network
When connecting the machine to the PC on the network, configure the host name or IP address of the PC in use.
When using DHCP, configure the host name. If DHCP is not used, configure the IP address.
1
Making a note of the host name or IP address.
1 From [Start] button on the Windows, select [All Programs], [Accessories] and then
[Command Prompt].
The Command Prompt window appears.
2 At the Command Prompt, enter "ipconfig /all" and then press [Enter].
NOTE
In Windows 8, display [Apps] on [Search] in charms on the Start screen, and select
[Command Prompt].
12
3