2-43
Installing and Setting up the Machine > Installing Software
3 Check the host name and IP address.
Screen example
Host Name: pc30-PC, DHCP: No, IP Address: 192.168.1.133
2
Configure the settings.
When connecting the machine to the PC on the network, configure the following settings in
addition to configuration of Setting Up the Scan Destination
(page 2-41).
1 Click [Connection Settings].
2 Select [Network] and enter the host name or IP address for the computer with the Print
Box to be used.
3 Click [OK] and [Save].
For other settings of scan, refer to Scan Destination Settings on page 7-26.
For how to use scan, refer to Use Your Desired Destination
on page 5-38.
To Next Page
Loading...
