2WA/2NJ/2RK
3-98
2nd sheet and after
4. By rotating the DF entry roller and DF
middle roller (c), 2nd paper (b) is con-
veyed to the process section as the 1st
sheet(a).
5. The conveying guide (d) descends
when the paper trailing edge passes the
DF middle roller (c). Then, by rotating
the paddles (e) and the adjusting pad-
dles (e), paper is conveyed to the
adjusting tray (g). Paper is adjusted as
well as the 1st sheet.
6. When adjusting the last paper of bundle
is complete, the bundle eject unit (h)
descends and the DF tray A eject roller
(i) rotates to eject the paper bundle to
the DF tray A (j).
Figure 3-88
i
j
c
b
a
c
e
f
d
h
To Next Page
