Kyocera TASKalfa 7002i - (8-1) Detaching and reattaching the operation panel PWB

2WA/2NJ/2RK
4-200
(8-1) Detaching and reattaching the operation panel PWB
Procedures
1. Tilt up the operation unit (a).
2. Remove the screw (b)(M3x8) and
remove the operation rear cover (c) in
the direction of the arrow.
Figure 4-300
3. Remove one screw (a)(M3x8).
4. Remove the operation lid (c) from the
operation unit (b) in the direction of the
arrow.
Figure 4-301
c
b
a
14j0214
b
a
c
14j0432