Kyocera TASKalfa 7002i - (5) Fuser section; (5-1) Detaching and reattaching the fuser unit

2WA/2NJ/2RK
4-42
(5) Fuser section
(5-1) Detaching and reattaching the fuser unit
Procedures
1. Pull out the conveying unit (a).
2. Remove the screw (b)(M3x8) and
remove the fuser wire cover (c).
3. Disconnect two connectors (d).
Figure 4-52
a
b
c
d
d
14j0066