Kyocera TASKalfa 7002i - Page 686

2WA/2NJ/2RK
6-93
Setting: Mag DC
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Setting: Mag AC
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Setting: Sleeve Freq
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Setting: Sleeve Duty
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Items Contents Setting range Data
variation
Initial
setting
K Black developer magnet roller DC bias
setting
0 to 255 - 122
Items Contents Setting range Data
variation
Initial
setting
K Black developer magnet roller AC bias
setting
0 to 255 - 201
Items Contents Setting range Data
variation
Initial
setting
Normal Developer sleeve roller frequency 0 to 6200 - 4640
Half Developer sleeve roller frequency at half
speed
0 to 6200 - 4640
3/4 Developer sleeve roller at 3/4 speed
Frequency
0 to 6200 - -
Items Contents Setting range Data
variation
Initial
setting
Normal Developer sleeve roller duty 1 to 99 - 37