Kyocera TASKalfa 7002i - Page 747

2WA/2NJ/2RK
6-154
Description
Sets whether to enable the automatic recovery function after the service call error
Purpose
Sets whether to enable the automatic recovery function after the service call error or system error
Setting
1.Press the [Start] key.
2.Select the item to set.
3.Press the [Start] key. Set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U287 Automatic recovery function
(Message: Set Auto Reset Function)
Items Contents
C0XXX Sets whether to enable the automatic recovery function after the service
call error
C1XXX Sets whether to enable the automatic recovery function after the C1xxx
code service call error
C2XXX Sets whether to enable the automatic recovery function after the C2xxx
code service call error
C3XXX Sets whether to enable the automatic recovery function after the C3xxx
code service call error
C4XXX Sets whether to enable the automatic recovery function after the C4xxx
code service call error
C5XXX Sets whether to enable the automatic recovery function after the C5xxx
code service call error
C6XXX Sets whether to enable the automatic recovery function after the C6xxx
code service call error
C7XXX Sets whether to enable the automatic recovery function after the C7xxx
code service call error
C8XXX Sets whether to enable the automatic recovery function after the C8xxx
code service call error
C9XXX Sets whether to enable the automatic recovery function after the C9xxx
code service call error
CFXXX Sets whether to enable the automatic recovery function after the CF
code service call error