2WA/2NJ/2RK
6-156
Contents
Sets whether to indicate the black lines cleaning guidance when detecting black lines.
Purpose
Displays the cleaning guidance to reduce the service call with the black lines by dust on the con-
tact glass when scanning from the document processor.
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
3.Select the item to set.
* :Initial setting: On
4.Press the [Start] key. Set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U326 Black line cleaning indication
(Message: Set Black Line Clean Display)
Items Contents
Black Line Mode Sets On/Off of the black line cleaning guidance indication
Items Contents
On Indicate the black lines cleaning guidance
Off Black line cleaning guidance is not indicated
To Next Page
Loading...
