2WA/2NJ/2RK
6-221
Contents
Sets the maximum number of error bytes judged acceptable when receiving a TCF signal. Exe-
cute it as one of measures to ease transmission conditions if transmission errors occur.
Purpose
* :Relax the communication conditions
Setting
1.Press the [Start] key.
2.Select [TCF Check].
3.By using the [+] [-] keys or the numeric keys, change the setting value.
4.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U634 Communication control procedures 5
(Message: Communication Control 5)
Items Contents Setting range Initial
setting
TCF Check Sets the allowed error bytes when detect-
ing the TCF signal
1 to 255 0
To Next Page
