2WA/2NJ/2RK
6-250
2.Set on/off for the number desired to set.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Set the disorder mode
Purpose
Set at the relay PWB disorder.
Execution
1.Press the [Start] key.
2.Change the setting value by using [+] [-] key or the numeric keypad.
* :Initial setting: 0(Mode 0)
3.Press the [Start] key and then fix the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U935 Maintenance relay PWB maintenance
(Message: Maintenance Relay Board)
Items Contents
Mode 0 Invalid for disorder setting mode
Mode 1 Valid for disorder setting mode
To Next Page
Loading...
