2WA/2NJ/2RK
6-253
Execution: Entry(USB)
1.Check the LED display is off and turn the power switch off.
2.Insert a USB memory into the USB memory slot.
3.Turn the power switch on.
4.Enter maintenance item U952.
5.Select [Entry(USB)].
6.Select [workflow].
7.Select the workflow save area.
8.Select [Execute].
* :Registers the workflow in a USB memory to the main unit.
Items Contents
SET UP 464,410,000,927,278
HIGH ALTITUDE 140,101,464
WARRANTY 089,000
MK 119,140,127,464,412,464,410,251
EH SETUP 411,034,246,211
Items Contents
WorkFlowData 01 - 07 Workflow data in a USB memory
Items Contents
Data 1 - 8 Workflow save area in the main unit
To Next Page
Loading...
